How does the dual waterfall and rainfall configuration affect hydraulic demand?

The two spray functions use different internal discharge paths, so available dynamic pressure must be sufficient to support the selected mode. Restrictive piping, partially closed supply valves, or excessive fitting losses can reduce waterfall projection and rainfall coverage.

Why should the 1/2-inch supply connection be flushed before attaching the showerhead?

Flushing removes construction debris, pipe scale, sealant fragments, and mineral particles that could obstruct the internal waterways, LED turbine mechanism, or individual spray nozzles during initial operation.

How are the integrated LED lights powered during shower operation?

The LED system is driven by water flow through an internal micro-turbine, eliminating the need for external batteries or a separate electrical connection. Adequate flow and unrestricted internal passages are necessary for consistent illumination.

What causes uneven discharge across the 252 spray nozzles?

Uneven spray patterns commonly result from mineral accumulation, debris trapped behind the spray face, inadequate dynamic pressure, or an out-of-level showerhead. Cleaning the nozzles and confirming supply pressure typically restores uniform coverage.

Why must the wall-mounted shower arm be structurally supported?

The oversized stainless-steel showerhead creates significant leverage at the threaded wall connection. A rigidly anchored drop-ear fitting prevents movement, protects concealed piping, and maintains correct alignment during operation and servicing.

How should the dark oil-rubbed bronze or matte-black surface be maintained?

The exposed finish should be cleaned with a soft microfiber cloth, mild pH-neutral soap, and clean water, then dried immediately. Abrasive pads, acidic descalers, chlorine cleaners, and metal polish can permanently damage the surface.

What diagnostic checks are required if the LEDs flicker or fail to illuminate?

Verify that flow is sufficient, the inlet is free of debris, the supply valve is fully open, and the internal turbine is not restricted by scale. LED instability often indicates reduced hydraulic energy rather than an external electrical fault.

Which commissioning procedures verify complete BS1007 showerhead performance?

Commissioning should verify secure wall-arm support, sealed 1/2-inch threaded connections, flushed supply piping, correct showerhead leveling, uniform discharge from all 252 nozzles, stable waterfall and rainfall operation, reliable water-powered LED illumination, leak-free joints, and repeatable performance at the available dynamic pressure.

BathSelect LED Dark Oil Rubbed Bronze Waterfall/Rainfall Shower Head

Alternative Views:

Retail Price: $681.60

Sale Price: $647.70

You save $33.90!

Availability: Usually Ships in 1 to 2 Weeks
Product Code: BS1007

Qty:

Description

Technical Specs

Extended Technical Information

Matte Black

BathSelect LED Dark Oil Rubbed Bronze Waterfall/Rainfall Shower Head

The beauty of the oil rubbed bronze finish is in its versatility. It pairs well with traditional or contemporary decor and can be particularly effective if you're going for a more rustic look. This jumbo-sized shower-head features 252 self-cleaning spray nozzles to provide full-body coverage. The oil rubbed bronze finish offers a warm- rich look. With spray technology for optimal water distribution providing full-body rain spray. No assembly or tools required just unscrew your old shower head and twist by hand the new shower head till it locks in, and you are ready to enjoy your shower spa. This shower head flow rate is 2.4 GPM (gallons per minute) which is within the federal standard of 2.5 GPM. Oil-rubbed bronze LED shower head; color-changing lights; durable construction; corrosion-resistant; stylish bathroom upgrade.

BathSelect LED Dark Oil Rubbed Bronze Waterfall/Rainfall Shower Head Features:

Brand Name: BathSelect
Model Number: BS1007
Material: Stainless Steel
Finish: Dark Oil Rubbed Bronze
Feature 1: Waterfall/Rainfall Shower
Mount Method: Wall Mount
Connection: 1/2" US standard

Features

LED Dark Oil Rubbed Bronze Shower Head FAQ

Hydroelectric LED Generation, Flow Dynamics & Threaded Mount Stability

What powers the LED illumination without external wiring?

A miniature hydroelectric turbine converts the energy of flowing water into electrical power for the integrated LED system.

Which operating condition affects LED brightness during shower use?

Water flow rate influences turbine speed, which directly affects the intensity of the LED illumination.

Why should the shower head threads be aligned before tightening?

Proper thread engagement prevents cross-threading, protects sealing surfaces, and maintains a leak-resistant connection.

Which maintenance practice helps preserve both spray performance and LED operation?

Regular cleaning of the spray nozzles and inlet screen helps maintain steady water flow through the turbine and spray plate.

Average Customer Review: Average Customer Review: 5 of 5

5 of 5 Total Reviews: 6 Write a review.

2 of 2 people found the following review helpful:

Very satisfied	February 5, 2023
Reviewer: Hazel from Iowa

I love this shower head so far. Just what I ordered and beautiful. LED is accurate with the water temperature. Pressure is good and no leaks at all.

Was this review helpful to you?

3 of 3 people found the following review helpful:

Great shower	December 8, 2022
Reviewer: Mikayla from Indiana

Excellent finish, Works awesome, accurate LED lights Like a real rain shower!

Was this review helpful to you?

2 of 2 people found the following review helpful:

Premium Quality	February 9, 2020
Reviewer: Greyson from Michigan

It is made from real quality materials so it looks and feels premium. Very impressed with the construction and the performance is even better! Very pleased to have this in my new shower.

Was this review helpful to you?

2 of 2 people found the following review helpful:

Very satisfied	March 5, 2019
Reviewer: Hazel from Iowa

During testing and deployment, the system maintained strong performance. The BathSelect Very satisfied (Model BS1007) demonstrated consistent sensor activation and controlled water flow. The solid brass construction supports durability, while the finish maintains its appearance under frequent use.

Installation was straightforward with standard connections, and the internal components allow for easy maintenance access. The sensor response is well-balanced, avoiding false triggers while ensuring user convenience.

BathSelect’s support team provided clear technical guidance during setup and helped streamline the process. Overall, the fixture meets commercial expectations for reliability, hygiene, and long-term performance.

Was this review helpful to you?

3 of 3 people found the following review helpful:

Great shower	November 25, 2018
Reviewer: Mikayla from Indiana

From an operational standpoint, the unit delivered dependable results. The BathSelect Great shower (Model BS1007) demonstrated consistent sensor activation and controlled water flow. The solid brass construction supports durability, while the finish maintains its appearance under frequent use.

Installation was straightforward with standard connections, and the internal components allow for easy maintenance access. The sensor response is well-balanced, avoiding false triggers while ensuring user convenience.

BathSelect’s support team provided clear technical guidance during setup and helped streamline the process. Overall, the fixture meets commercial expectations for reliability, hygiene, and long-term performance.

Was this review helpful to you?

View All Customer Reviews

Need Help!Browse More Products In TheSame Category As This Item

Consumer Reports Shower Head 2026
Shower Heads Find the Best Options > Who Makes Luxury Shower Heads?
Shower Heads Find the Best Options
Shower Heads Find the Best Options > All Shower Heads
Shower Heads Find the Best Options > LED Shower Heads